Airport Information For EHRD. Printed on 27 Jan . Chart only to be used for cross-checking of altitudes while under. RADAR control. 2. VFR Chart of EHRD. IFR Chart of EHRD. Location Information for EHRD. Coordinates: N51°’ / E4°’ View all Airports in Zuid-Holland, Netherlands. Remain on Tower frequency until passing ‘, then contact SCHIPHOL. Departure and report altitude in order to verify SSR mode C by ATC.
|Published (Last):||24 June 2016|
|PDF File Size:||15.56 Mb|
|ePub File Size:||18.91 Mb|
|Price:||Free* [*Free Regsitration Required]|
Box GA Rotterdam.
All TWYs except V4: Details concerning information for users: Adhere strictly to the follow-me instructions. Runway in use 1.
SID designation is composed of the following elements:. After arrival eehrd the holding fix intercept the holding pattern. Permission for start-up will be issued either immediately or at a specified time. Main landing runway 2.
Upon request, contact airport authority Charys on channel Turn anticipation is mandatory for all waypoints except those which are underlined, these waypoints shall be overflown. If a flight cannot take place, the slot time must always be cancelled, even if cancellation occurs on the day of the flight. For such flights radio communication is not compulsory.
In case of delay, permission can be granted by airport authority for landing till and for take-off till SAT for aircraft equipped with turbojet engines. In case of go around execute a similar circuit be aware of the fact that your flight path could interfere with the flight path of other aerodrome traffic.
When lightning discharges are observed in the vicinity of the airport, the Duty Manager Operations DMO will announce that all ground handling and re-fuelling operations are prohibited until further notice. Pilots shall request permission from ATC before starting engines and when applicable report a cross-bleed start.
Start climbing and complete the turn to the intended landing runway see figure. Box GC Ridderkerk. Initiate turns in due time in order not to overshoot radials. Measured coefficient Estimated surface friction 0.
Wrong ILS APP Draw – Archive – Flight Sim Labs Forums
Information concerning improvement of estimated surface friction: Both areas are separated by the area between highway A13 and the Delftsche Schie. The airport is below operational limits for arriving and departing aircraft. In case of indefinite delay the probable duration of delay will be given. The en route clearance will be issued after start-up clearance has been given by Rotterdam Delivery.
A request for start-up includes: These figures apply to take-off from RWY extremity. In case of communication failure adhere to the departure instructions. Pilots shall adhere to the approach or departure route as indicated on the charts, unless otherwise instructed by ATC.
Measuring of estimated surface friction: Join the circuit as instructed by ATC. SIDs have to be considered as minimum noise routings which shall be strictly adhered to.
IFR Terminal Charts for Rotterdam-Zestienhoven (EHRD) (Jeppesen EHRD)
Pilots shall strictly ehdd to the circuits as indicated on the charts, unless otherwise instructed by ATC. RWY guard lights at holding positions.
Example of an en route clearance: SID designation is composed of the following elements: The execution of training flights is prohibited daily from